Windows 7 RTM 7600.16385 Untouched ISO

Windows 7 RTM 7600.16385 Untouched ISO

Original Hashes from technet: Code:

- Download and extract using WinRAR.
Use NERO to burn the ISO image
Burning speed should not be faster than 4x. Otherwise, it might not work.
Restart your computer.

Make sure you’ve seleceted your DVD-ROM/RW drive as a first boot device
* Enter the BIOS pressing the DEL button, set the option, insert your Windows 7 installation and restart computer.

The black screen will appear (image 01).
Press any key to boot from CD or DVD…. (by pressing the key you’re entering the setup)
Select your language, time and currency and keyboard input (optionaly)
Click install now

Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type you have.
*Choose x64 if you have 64-bit processor.
Click "I accept".
Click "Custom (advanced).
Choose your partition/hdd drive where Win7 should be installed and click format.
*You might get some error if you have two or more hard disks with different connectors (ATA and SATA).
If you get an error, turn off one of your hard disks and repeat the whole proces.

After formatting, setup will continue automaticly and it will finish after 15-30 min.
Next step would be username (Image 17).
Type your password (if you want).
When you get the screen for CD-KEY just ignore it leaving blank.

*Uncheck the box for automaticly activation and click next.
Choose the third option for next step.
Select your time zone.
Select your current location (Home is recommended).
The black CMD windows will appear. Wait a few seconds until computers restares once again.
And that would be all about installation. You’re in Windows now.

*Activation*
It’s not required, because it’s OEM. Windows will be premanently activated.
However, it’s well known that there is some problems with DELL and HP machines.
So if you have issues with pre-activation you’ll be forced to some activator to activate Windows 7.

Code:














Code:













Code:

:صح: